Sitesearch

Stakeholders

Navigation

Choose glossary language

 

transmission lines

Synonyms: transmission, transmission networks, electrical lines

reegle definition:

Transporting electric power over long distances, usually at high voltage to reduce losses.

Wikipedia definition:

Electric-power transmission is the bulk transfer of electrical energy, from generating power plants to electrical substations located near demand centers. This is distinct from the local wiring between high-voltage substations and customers, which is typically referred to as electric power distribution. Transmission lines, when interconnected with each other, become transmission networks. In the US, these are typically referred to as "power grids" or just "the grid. " In the UK, the network is known as the "National Grid". North America has three major grids, the Western Interconnection, the Eastern Interconnection and the Electric Reliability Council of Texas (ERCOT) grid, often referred to as the Western System, the Eastern System and the Texas System. Historically, transmission and distribution lines were owned by the same company, but starting in the 1990s, many countries have liberalized the regulation of the electricity market in ways that have led to the separation of the electricity transmission business from the distribution business. Most transmission lines use high-voltage three-phase alternating current (AC), although single phase AC is sometimes used in railway electrification systems. High-voltage direct-current (HVDC) technology is used for greater efficiency in very long distances (typically hundreds of miles), or in submarine power cables (typically longer than 30 miles). HVDC links are also used to stabilize against control problems in large power distribution networks where sudden new loads or blackouts in one part of a network can otherwise result in synchronization problems and cascading failures. Electricity is transmitted at high voltages (110 kV or above) to reduce the energy lost in long-distance transmission. Power is usually transmitted through overhead power lines. Underground power transmission has a significantly higher cost and greater operational limitations but is sometimes used in urban areas or sensitive locations. A key limitation in the distribution of electric power is that, with minor exceptions, electrical energy cannot be stored, and therefore must be generated as needed. A sophisticated control system is required to ensure electric generation very closely matches the demand. If the demand for power exceeds the supply, generation plants and transmission equipment can shut down which, in the worst cases, can lead to a major regional blackout, such as occurred in the US Northeast blackouts of 1965, 1977, 2003, and other regional blackouts in 1996 and 2011. To reduce the risk of such failures, electric transmission networks are interconnected into regional, national or continental wide networks thereby providing multiple redundant alternative routes for power to flow should (weather or equipment) failures occur. Much analysis is done by transmission companies to determine the maximum reliable capacity of each line (ordinarily less than its physical or thermal limit) to ensure spare capacity is available should there be any such failure in another part of the network.

Source: dbpedia

glossary info

How to Search Terms

Please enter a search term or choose a letter to navigate the glossary and to find definitions. This glossary aims to facilitate collaboration on the development of ambitious energy efficiency measures by clarifying definitions and highlighting common terminology. Definitions have been collected from trusted sources. It intended to expand this glossary in the future to include a wiki ensuring a truly collaborative process. If you contribute to this glossary please contact use at: info@reegle.info

Understanding Relations

The relation browser enables the user to see the relations between terms.

Below is an explanation of the letters that appear on the arrows in the relation browser

C = Has Concept Scheme. Points to a concept scheme in the reegle glossary. Concept schemes provide the main categories of the reegleglossary.
T = Has Top Concept. Points to a top concept in the reegleglossary. Top Concepts are the top level concepts in a concept scheme.
N = Has Narrower. Points to a narrower concept of the selected concept